Akka（9）：分布式运算：Remoting-远程构建式

用户1150956
关注文章
TinyMind专栏频道

上篇我们讨论了Akka-Remoting。我们说Akka-Remoting是一种点对点的通讯方式，能使两个不同JVM上Akka-ActorSystem上的两个Actor之间可以相互沟通。Akka-Remoting还没有实现完全的Actor位置透明（location transparency），因为一个Actor还必须在获得对方Actor确切地址信息后才能启动与之沟通过程。Akka-Remoting支持“远程查找”和“远程构建”两种沟通方式。由于篇幅所限，我们只介绍了“远程查找”。在这一篇里我们将会讨论“远程构建”方式。

同样，我们先通过项目结构来分析：

lazy val local = (project in file("."))
  .settings(commonSettings)
  .settings(
    name := "remoteCreateDemo"
  ).aggregate(calculator,remote).dependsOn(calculator)

lazy val calculator = (project in file("calculator"))
  .settings(commonSettings)
  .settings(
    name := "calculator"
  )

lazy val remote = (project in file("remote"))
  .settings(commonSettings)
  .settings(
    name := "remoteSystem"
  ).aggregate(calculator).dependsOn(calculator)

远程构建的过程大致是这样的：由local通知remote启动构建Actor；remote从本地库中查找Actor的类定义（class）并把它载入内存。由于驱动、使用远程Actor是在local进行的，所以local,remote项目还必须共享Calculator，包括Calculator的功能消息。这项要求我们在.sbt中用aggregate(calculator)来协同编译。

我们把Calculator的监管supervisor也包括在这个源码文件里。现在这个calculator是个包括监管、功能、消息的完整项目了。Calculator源代码如下：

package remoteCreation.calculator

import akka.actor._
import scala.concurrent.duration._

object Calcultor {
  sealed trait MathOps
  case class Num(dnum: Double) extends MathOps
  case class Add(dnum: Double) extends MathOps
  case class Sub(dnum: Double) extends MathOps
  case class Mul(dnum: Double) extends MathOps
  case class Div(dnum: Double) extends MathOps

  sealed trait CalcOps
  case object Clear extends CalcOps
  case object GetResult extends CalcOps

  def props = Props(new Calcultor)
  def supervisorProps = Props(new SupervisorActor)
}

class Calcultor extends Actor with ActorLogging {
  import Calcultor._

  var result: Double = 0.0   //internal state

  override def receive: Receive = {
    case Num(d) => result = d
    case Add(d) => result += d
    case Sub(d) => result -= d
    case Mul(d) => result *= d
    case Div(d) =>
      val _ = result.toInt / d.toInt   //yield ArithmeticException
      result /= d
    case Clear => result = 0.0
    case GetResult =>
      sender() ! s"Result of calculation is: $result"
  }

  override def preRestart(reason: Throwable, message: Option[Any]): Unit = {
    log.info(s"Restarting calculator: ${reason.getMessage}")
    super.preRestart(reason, message)
  }
}

class SupervisorActor extends Actor {
  def decider: PartialFunction[Throwable,SupervisorStrategy.Directive] = {
    case _: ArithmeticException => SupervisorStrategy.Resume
  }

  override def supervisorStrategy: SupervisorStrategy =
    OneForOneStrategy(maxNrOfRetries = 5, withinTimeRange = 5 seconds){
      decider.orElse(SupervisorStrategy.defaultDecider)
    }

  val calcActor = context.actorOf(Calcultor.props,"calculator")

  override def receive: Receive = {
    case msg@ _ => calcActor.forward(msg)
  }

}

与上一个例子的”远程查找式“相同，remote需要为Remoting公开一个端口。我们可以照搬.conf配置文件内容：remote/src/main/resources/application.conf

akka {
  actor {
    provider = remote
  }
  remote {
    enabled-transports = ["akka.remote.netty.tcp"]
    netty.tcp {
      hostname = "127.0.0.1"
      port = 2552
    }
    log-sent-messages = on
    log-received-messages = on
  }
}

由于远程构建和使用是在local上进行的，在remote上我们只需要启动ActorSystem就行了：

import com.typesafe.config.ConfigFactory
import akka.actor._

object CalculatorRunner extends App {
  val remoteSystem = ActorSystem("remoteSystem",ConfigFactory.load("application"))
  println("Remote system started.")

  scala.io.StdIn.readLine()
  remoteSystem.terminate()

}

Calculator的构建是在localSystem上启动的，我们需要在配置文件中描述远程构建标的（还是未能实现位置透明）：local/src/main/resources/application.conf

akka {
  actor {
    provider = remote,
    deployment {
      "/calculator" {
        remote = "akka.tcp://remoteSystem@127.0.0.1:2552"
      }
    }
  }
  remote {
    netty.tcp {
      hostname = "127.0.0.1",
      port=2554
    }
  }
}

注意：上面这个/calculator设置实际上指的是SupervisorActor。

现在我们可以在local上开始构建calculator，然后使用它来运算了：

import akka.actor._
import remoteCreation.calculator.Calcultor._
import scala.concurrent.duration._
import akka.pattern._

object RemotingCreate extends App {
  val localSystem = ActorSystem("localSystem")
  val calcActor = localSystem.actorOf(props,
    name = "calculator")   //created SupervisorActor

  import localSystem.dispatcher

  calcActor ! Clear
  calcActor ! Num(13.0)
  calcActor ! Mul(1.5)

  implicit val timeout = akka.util.Timeout(1 second)

  ((calcActor ? GetResult).mapTo[String]) foreach println
  scala.io.StdIn.readLine()

  calcActor ! Div(0.0)
  calcActor ! Div(1.5)
  calcActor ! Add(100.0)
  ((calcActor ? GetResult).mapTo[String]) foreach println

  scala.io.StdIn.readLine()
  localSystem.terminate()

}

从代码上看构建calculator（SupervisorActor）过程与普通的Actor构建没分别，所有细节都放在配置文件里了。但是，要注意actorOf的name必须与配置文档中的设置匹配。

试运行结果与上一个例子相同。值得注意的是实际远程构建的是一个SupervisorActor。Calculator的构建是SupervisorActor构建的其中一部分。从运算结果看：这个SupervisorActor也实现了它的功能。

下面是这次示范的源代码：

local/build.sbt

azy val commonSettings = seq (
  name := "RemoteCreateDemo",
  version := "1.0",
  scalaVersion := "2.11.8",
  libraryDependencies := Seq(
    "com.typesafe.akka" %% "akka-actor" % "2.5.2",
    "com.typesafe.akka" %% "akka-remote" % "2.5.2"
  )
)


lazy val local = (project in file("."))
  .settings(commonSettings)
  .settings(
    name := "remoteCreateDemo"
  ).aggregate(calculator).dependsOn(calculator)

lazy val calculator = (project in file("calculator"))
  .settings(commonSettings)
  .settings(
    name := "calculator"
  )

lazy val remote = (project in file("remote"))
  .settings(commonSettings)
  .settings(
    name := "remoteSystem"
  ).aggregate(calculator).dependsOn(calculator)

calculator/calculator.scala

package remoteCreation.calculator

import akka.actor._
import scala.concurrent.duration._

object Calcultor {
  sealed trait MathOps
  case class Num(dnum: Double) extends MathOps
  case class Add(dnum: Double) extends MathOps
  case class Sub(dnum: Double) extends MathOps
  case class Mul(dnum: Double) extends MathOps
  case class Div(dnum: Double) extends MathOps

  sealed trait CalcOps
  case object Clear extends CalcOps
  case object GetResult extends CalcOps

  def props = Props(new Calcultor)
  def supervisorProps = Props(new SupervisorActor)
}

class Calcultor extends Actor with ActorLogging {
  import Calcultor._

  var result: Double = 0.0   //internal state

  override def receive: Receive = {
    case Num(d) => result = d
    case Add(d) => result += d
    case Sub(d) => result -= d
    case Mul(d) => result *= d
    case Div(d) =>
      val _ = result.toInt / d.toInt   //yield ArithmeticException
      result /= d
    case Clear => result = 0.0
    case GetResult =>
      sender() ! s"Result of calculation is: $result"
  }

  override def preRestart(reason: Throwable, message: Option[Any]): Unit = {
    log.info(s"Restarting calculator: ${reason.getMessage}")
    super.preRestart(reason, message)
  }
}

class SupervisorActor extends Actor {
  def decider: PartialFunction[Throwable,SupervisorStrategy.Directive] = {
    case _: ArithmeticException => SupervisorStrategy.Resume
  }

  override def supervisorStrategy: SupervisorStrategy =
    OneForOneStrategy(maxNrOfRetries = 5, withinTimeRange = 5 seconds){
      decider.orElse(SupervisorStrategy.defaultDecider)
    }

  val calcActor = context.actorOf(Calcultor.props,"calculator")

  override def receive: Receive = {
    case msg@ _ => calcActor.forward(msg)
  }

}

remote/src/main/resources/application.conf

akka {
  actor {
    provider = remote
  }
  remote {
    enabled-transports = ["akka.remote.netty.tcp"]
    netty.tcp {
      hostname = "127.0.0.1"
      port = 2552
    }
    log-sent-messages = on
    log-received-messages = on
  }
}

remote/CalculatorRunner.scala

package remoteCreation.remote
import com.typesafe.config.ConfigFactory
import akka.actor._

object CalculatorRunner extends App {
  val remoteSystem = ActorSystem("remoteSystem",ConfigFactory.load("application"))
  println("Remote system started.")

  scala.io.StdIn.readLine()
  remoteSystem.terminate()

}

local/src/main/resources/application.conf

akka {
  actor {
    provider = remote,
    deployment {
      "/calculator" {
        remote = "akka.tcp://remoteSystem@127.0.0.1:2552"
      }
    }
  }
  remote {
    netty.tcp {
      hostname = "127.0.0.1",
      port=2554
    }
  }
}

local/RemotingCreation.scala

import akka.actor._
import remoteCreation.calculator.Calcultor._
import scala.concurrent.duration._
import akka.pattern._

object RemotingCreate extends App {
  val localSystem = ActorSystem("localSystem")
  val calcActor = localSystem.actorOf(props,
    name = "calculator")  //created SupervisorActor

  import localSystem.dispatcher

  calcActor ! Clear
  calcActor ! Num(13.0)
  calcActor ! Mul(1.5)

  implicit val timeout = akka.util.Timeout(1 second)

  ((calcActor ? GetResult).mapTo[String]) foreach println
  scala.io.StdIn.readLine()

  calcActor ! Div(0.0)
  calcActor ! Div(1.5)
  calcActor ! Add(100.0)
  ((calcActor ? GetResult).mapTo[String]) foreach println

  scala.io.StdIn.readLine()
  localSystem.terminate()

}
优质内容筛选与推荐>>
1、kafka入门第一篇
2、Eclipse Android 代码自动提示功能
3、Android 实现对软键盘(收起和弹出)的监听
4、WinForm登陆：窗体间的数据传递
5、01-Maven


长按二维码向我转账

受苹果公司新规定影响，微信 iOS 版的赞赏功能被关闭，可通过二维码转账支持公众号。

    阅读
    好看
    已推荐到看一看
    你的朋友可以在“发现”-“看一看”看到你认为好看的文章。
    已取消，“好看”想法已同步删除
    已推荐到看一看 和朋友分享想法
    最多200字，当前共字 发送

    已发送

    朋友将在看一看看到

    确定
    分享你的想法...
    取消

    分享想法到看一看

    确定
    最多200字，当前共字

    发送中

    网络异常，请稍后重试

    微信扫一扫
    关注该公众号

    0 │ 收藏 │ 举报